A guide for IT and People teams that need to replace computers for employees distributed across multiple countries: when it is best to do it, how to organize the swap so the person can keep working, and what to do with the outgoing equipment.
In a company with remote workers, the most frequent movement in the hardware fleet is not the initial purchase. It is replacement. A computer is replaced because it failed, because it reached the end of its useful life, or because the person changed roles and needs a different machine.
In an office, that swap is resolved in twenty minutes: someone goes down to the storage room, brings up a machine, and that's it. With a team distributed across Bogotá, Mexico City, and Buenos Aires, the same swap involves shipping a computer to a home address, migrating data, picking up the old one, and updating inventory. If any of those steps fall through, the person loses working days or the old equipment stays at their home without anyone tracking it.
The goal of a good replacement process is ensuring the person doesn't lose working days. In this article, I explain how we organize it.
Why is replacing a laptop remotely harder than delivering it for the first time?
Because in a replacement, there are two devices in play and a person who needs to keep working in the meantime. In the first delivery, you only have to get a computer to someone. In a replacement, you have to coordinate two opposite movements—one outgoing and one incoming—and ensure that information moves from one device to the other without getting lost along the way.
The outgoing movement usually goes well because it is urgent: the person cannot work. The return movement is the one that fails. Once the employee has their new computer, picking up the old one is no longer a priority for anyone. If the pickup isn't coordinated at the same time as the delivery, it almost never happens.
This is how ghost devices are created: old computers that sit for months or years in employees' homes, containing company data and with no record of their existence. They don't appear as assets, but they remain a security risk and an asset value that the company failed to recover. It's the same problem that occurs in an offboarding without a process, with one difference: in a replacement, the person is still with the company, which is why no one feels that anything is left pending.
When should a corporate computer be replaced?
A computer should be replaced when a predefined rule is met, not when forced by urgency. The most common triggers are device age based on usage profile, recurring failures, role changes, loss or theft, and end of operating system update support. Without a written rule, every replacement is decided at the worst possible moment.
Trigger | When it applies | What should be reviewed |
|---|---|---|
Device age | When it reaches the cycle defined for its usage profile | Whether performance is still sufficient for that person's work |
Recurring failure | When the same device accumulates incidents (for example, two in six months) | Whether the next repair costs almost as much as a new device |
Role change | When the person transitions to more demanding tasks, such as development or editing | Whether an upgrade in memory or storage is enough |
Loss or theft | Always | Remote lock and wipe before dispatching the replacement |
End of support | When the operating system stops receiving security updates | Which devices in the fleet are affected at the same time |
There is no single renewal cycle, and it is best to be wary of any number presented as universal. What defines how long a device lasts is the usage profile: a sales or administrative role can keep the same computer much longer than a developer running heavy environments all day, or someone who travels frequently with their laptop.
That is why a renewal policy works best when defined by profiles rather than a fixed timeframe for the entire company. What makes a replacement expensive is not the age of the equipment, but the urgency: unplanned purchases, expedited shipping, and people idle while waiting. A written rule for each profile turns most replacements into scheduled moves.

How do you replace a laptop without the person losing workdays?
With overlapping: the new equipment arrives before the previous one is collected. For a few days, the person has both computers, migrates their information calmly, and only then is the collection coordinated. That window prevents a lost workday and, moreover, is what ensures the collection actually happens, because the person no longer depends on the old device.
The workflow we use has five steps:
Diagnosis and decision. It is confirmed that a replacement is needed, and the equipment the person will receive is determined based on their profile.
Preparation and dispatch. If the company uses MDM, the new device is dispatched enrolled and preconfigured with the tools defined by its IT team.
Migration with the previous device available. If the company chooses to overlap, the person receives the new computer and transfers their work without rushing.
Coordinated collection. Depending on company policy, we schedule a date with the employee to collect the previous equipment from the same address.
Diagnosis of the retrieved equipment. This determines its next step: returning to stock, undergoing repair, or being decommissioned from inventory.
The timeframes for each step vary depending on the country and city, and it is best to plan with that in mind. What remains consistent is the criteria.
There are cases where overlapping is not possible: theft, loss, or a device that completely stopped working. In those situations, continuity depends on how close the replacement is. A functional device stored in the same country is dispatched much faster than a new purchase or an international shipment. And in the event of theft or loss, remote locking and wiping take priority before any replacement—something that is only possible if the device was enrolled in MDM. In this article on MDM and asset management, we explain why it is advantageous to have both layers.

What happens to equipment that is taken out of circulation?
It depends on its condition, and the destination should be decided with a diagnostic, not at first glance. Retired equipment can return to stock to be reassigned, go through technical service and be reintroduced, be sold through a buyback program, or be decommissioned. Without a diagnostic, all retired equipment ends up in a box without anyone knowing if it still works.
Before any destination, the equipment undergoes secure data wiping. Afterwards, depending on the diagnostic, it follows one of these paths:
Reassignment: the equipment is in good condition, it is sanitized and returned to stock for the next person who joins. It is the option that reduces the cost per device the most.
Repair and re-entry: it has a specific fault that is fixed by technical service and then returns to stock.
BuyBack: it works, but it no longer has an internal destination, for example after a fleet renewal. It is sold and the company recovers part of its value as cash or credit toward new equipment.
Decommissioning: its useful life has ended and it is removed from inventory.
We elaborate on each of these paths in the article on what to do with computers that become available. In the case of replacement, the key is to decide the destination before retrieval, so that the equipment does not end up in limbo after returning.
How to keep inventory up to date during a replacement?
With a record that changes at the moment of the physical movement, not weeks later. Each replacement generates at least two status changes: the new equipment becomes assigned, and the previous one follows its own path to the final destination. If these changes are entered manually later on, the inventory becomes outdated and ceases to be useful for auditing or purchasing planning.
When management is handled by a partner like First Plug, each of these changes is recorded on the same platform as it happens: dispatch, delivery, pickup, and the final destination of the equipment. This way, no one has to enter anything manually, and the inventory remains updated in real time.
How do we handle replacements at First Plug?
At First Plug, we take care of managing the entire lifecycle of remote hardware, which includes replacements and IT support services whenever necessary. We ship to over 170 countries, and particularly in LATAM, we have our own operations that allow us to act faster.
Since we are the ones executing every movement, the management platform is updated along with the action itself. Each device has a serial number, location, and real-time status, and obsolete equipment alerts allow renewals to be anticipated before they turn into emergencies. The data and the action are one and the same. The complete journey of services is available in this summary of all our solutions.
Frequently Asked Questions
Who coordinates the pickup of the previous device with the employee?
First Plug does. Our team schedules a date with the person and picks up the device at their home. The IT team doesn't have to follow up or chase anyone to get the computer back, and the device's status is updated on the platform at every step of the way.
Is it better to repair or replace a malfunctioning laptop?
It depends on the diagnosis. If the issue is isolated and the device is still within its usage cycle, repairing it is usually the best option. If it has accumulated multiple incidents, is near the end of its useful life, or the repair costs nearly as much as a new device, it's better to replace it.
What happens to company data on the outgoing device?
Before sending it to any destination, it is recommended that the device undergo a secure data wipe (Factory Reset) so that the information cannot be recovered. If it is going to be reused, it is also sanitized—meaning it is physically cleaned. And if it was enrolled in an MDM, access to company systems can be revoked remotely prior to pickup.
Does a role change always require a new device?
Not always. If the current device is relatively new, sometimes a RAM or storage upgrade is enough to handle more demanding tasks. If the new role requires a different type of machine, such as transitioning from administrative tasks to development or video editing, replacement is the most efficient option.
A well-executed replacement goes unnoticed
Computer replacements will happen in any company with remote staff, and they will happen often. The difference lies in whether it comes as an emergency or as a scheduled move: a clear rule to decide when, a new device arriving before the old one is collected, and an inventory that updates instantly.
With those three pieces in place, a replacement stops costing days of work and stops creating ghost devices.
You might also be interested in…
















